Search
1 800 463-4710 (QC) | 1 888 506-9600 (MTL)
Infinity
         of Choice!
An infinity of plastic products fulfilling an infinity of needs
Customized catalog
Unequaled service and expertise, Groupe PolyAlto, a myriad of plastics at your fingertips
Services
Unlimited adaptability!
For all your customized project needs.
Contact Us
Need information ?
We will be delighted to hear from you !
Teflon

Teflons are made of a fluoride plastic which is highly resistant to chemical substances as well as having an outstanding thermal stability at high temperature and a low friction coefficient. Note that Teflon® is also the product trademark and that of the manufacturer who invented it: Dupont™ Teflon®.

Quote request
Size :
Fluorofab® Belting

The Fluorofab® belts are manufactured as an open mesh fiberglass belt, impregnated with a hard PTFE Teflon®. The non-stick surfaces of these resins offer a temperature range from - 400 °F to + 600 °F.

The sewn glass substrat provides exceptional strength and dimensional stability with a 70% open screen area providing a high airflow level, increasing the drying speed and reducing energy consumption. This fabric is also available in a black coating for ultraviolet drying applications.

Strengthening edge reinforcement : GBI belts can be provided with a heat sealed or sewn band fabric on one or both edges.Strengthening provides two functions; it reduces the fraying (tearing out) of the belt edge and it provides the strongest possible anchoring for pins used to guide belts, clamps and rings. Reinforcement for edges is standard for belts connected by pins or rings.

Size Dimensions Thickness Diameter Length Width
Roll 1 ą 36 x 18yd to 36yd .003 and .014      
Fluorofab® belts : Joins, Alignments and Guiding
As often as possible, GBI belts should be ordered with heat sealed joins which provide as much resistance as the belt material (joins can be sewn for additional strenght).
 
Alligator Type Join: This mechanical join consists of metallic interlaced hooks through which a pin is introduced to complete the joint. This mechanism allows the belt to be reached without having to disassemble the machine.
 
Fabric Pin Join: This flexible sealing joint, similar to the alligator type joint, does not need metallic hooks. The jagged (indented) ends are made with the same material as the belt and a pin, made of a special fabric, reinforces the joint. Supplied with a PTFE pin, this type of belt is used in ovens and microwave equipment.
 
Join Protection: Heat sealed fabric flaps are also used to cover alligator type joins, so that the interlaced metal hooks do not come into contact with conveyed products on the machine straps.
 
Guiding System Incorporated into the Belt: GBI belt can be supplied with guiding pins (or clamps) on one or both belt edges. These guiding pins are made to guide and carry belts through engraved pulley grooves to keep the belt aligned. The edge reinforcement is standard everywhere pins or ties are adjusted and fixed at 1/2 inch lengths from the belt edge with spacing of 1 1/2 inches center-to-center. Pins attached to both edges are recommended for belts having a width of more than 12 inches.